ANC-3089Manual(pdf)
Other Products
Sales
Contact Information
Search
Antona Corporation
Contact us
MAC Engine + Ethernet Interface
For Sale Only to Current Users
The ANC-3089 adapter provides the designer with a complete
media access control (MAC) engine which formats frame data, calculates
CRC, transmits and receives packets of data compatible with the ethernet
IEEE-802.3 interface standard. The card interfaces to the outside
network world by a shielded RJ-45 ethernet connector. Control of
the adapter is through a universal 40-pin connector which mates with an
IDC ribbon cable connector, or may be wire wrapped from the solder side
of the card via .018 inch gold machine pins or .025 inch square wire/wrap
posts. The adapter finds use for initial ethernet designs,
equipment prototyping and for short production runs. A single +5V
DC at 60ma powers the card through a 4-pin SIP connector. - IEEE-802.3 Ethernet MAC controller
- 10Base-T - 10 Mbps data transfer rate
- 8 or 16-bit Interface
- Functions with only 4 address and 4 control lines
- 4K of on board frame buffer RAM
- Full duplex, auto polarity operation
- Powered from a single 5v DC source
- 3 status LEDs - Link, packet activity and user defined
- Perfect for Prototype and short production runs
- Surface mount technology for low power and small size
- Reset polarity select jumper
- Example 8051 Interface
Easy to Use
Shipped ready for installation. Jumpers are pre installed for the most
commonly applied configuration and a comprehensive
user's manual is included.
Warranty
Every Antona product is built and tested to meet high standards of
quality and reliability. Our products are covered with a one year
warranty.
Mechanical Specifications
- Adapter size: 2.5" X 2.2"
- 40-pin IDC/machine pin connector for computer interface
- 4-pin SIP/machine pin connector for power and
- RJ-45 isolation transformer type connector for network interfacing
- Power requirements = 5v DC at 60 ma.
- TTL level interface signals
- Ethernet Input/Output = 100 ohm impedance per IEEE-802.3
Pricing and Accessories
Delivery is from stock, ANC-3089 unit pricing is US$ 59.00ANC-ETH25, 25 foot CAT-5 cable is US$ 19.00
ANC-ETH10, 10 foot CAT-5 cable is US$ 9.00